Payment & Shipping Terms:
|Load Capacity:||1000 Kg||Standard Height:||50 M|
|Max. Height:||200-400 M||Rated Speed:||0-40 M/min Or 0-60 M/min|
|Motor Power:||2*11 Kw Or 2*15 Kw||Motor Brand:||Xingxiang, Sanshang, Juli Or Other|
|Mast Section Size:||650*650*1508mm Or 800*800*1508mm||Cage Size:||3*1.3*2.3m Or Customized|
|Color:||Red Or According To Clients Need||Condition:||100% New Passenger Hoist|
1.0tons Outer Building Elevator Construction Safety Hoist with inverter control
Introduction of Building Elevator
SC series construction elevator, adopt external setting meshing rack and pinion type design, rated load is 1T, rated lifting height is 150m. Equipped with a national patent approved progressive safety device, can brake automatically when falling situation occurs. And the drive system is on the top of the cage, reliable and easy to operate and maintenance. The highest working lifting height can up to 400M. Construction Elevator is widely used in Construction Projects, Such as industrial and residential building projects, bridge construction, underground construction, large chimney construction buildings and shipping building industry and other place. Which is a vertical transport equipment used for material and personnel as a permanent and temporary elevator also can be used for warehouse and high towers buildings projects
Parameter of Building Elevator
|Model||SC100 Single Cage Outer Building Elevator|
|Payload capacity||1000 kg|
|Speed||0-40 m/min or 0-60m or depend on clients needs|
|Max. lifting height||250-400 m (Increased lifting height on request.)|
|Cage width (internal)||1.3 m & 1.5 m|
|Cage length (internal)||3 m|
|Cage height (internal)||2.2 m|
|Motor control||Directly driven with inverter / VFD|
|Motor power||2 x 2 x 11 kw or 2 x 2 x 8.5 kw or 2 x 2 x 13 kw|
|Power supply range||380V, 50Hz or 60 Hz, 3 phase|
|Type of mast||650*650*1508mm|
|Weight mast section with 1 racks||127 kg|
CHARACTERISTICS of Building Elevator
1. Starting and braking are smooth with no impact.
2. The lifting speed can be easily controlled .
3. Starting current is lower than the rating current .
4. The mechanical wear can be reduced effectively. The mechanical wear of gear and rack can be reduced greatly because of no impact at starting, especially the reducing of wear of brake.
5. Power saves efficiently.
Photos of Building Elevator